Carrier 19XL Specifiche Pagina 17

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 80
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 16
Rig Machine Components
Refer to instructions below, Figure 5, Figure 6, Figure 7, Figure 8, Figure 9, and Carrier
Certified Prints for machine component disassembly.
Note:
If the cooler and condenser vessels must be separated, the heat exchanger separation
feet can be unbolted, slipped down, and re-bolted in order to keep each heat exchanger
level. See Figure 3.
IMPORTANT: Only a qualified service technician should perform this operation.
Do not attempt to disconnect flanges while the machine is under pressure. Failure
to relieve pressure can result in personal injury or damage to the unit.
WARNING
!
WARNING
CAUTION
CAUTION
!
Before rigging the compressor, disconnect all wires entering the power panel.
Vedere la pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 79 80

Commenti su questo manuale

Nessun commento