
PH61
PH61Shake Freezer
Electrical
One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.
Beater Motor
One, 1.0 HP
Refrigeration System
One, 11,000 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)
Air Cooled
Minimum Clearance: 6” (152 mm) on all sides. Minimum air clearances must
be met to assure adequate air flow for optimum performance.
Water Cooled
Water inlet and drain connections under side of base 3/8” FPT.
Printed in U.S.A.
Electrical Maximum Minimum Poles (P)
Fuse Size Circuit Ampacity Wires (W)
208-230/60/3 Air 25 19 3P 4W
208-230/60/3 Water 25 18 3P 4W
220-240/50/3 Air 25 18 3P 4W
380-415/50/3N~ Air 20 16 4P 5W
This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)
Weights lbs. kgs.
Net 608 275.8
Crated 650 294.8
cu. ft. cu. m.
Volume 66.5 1.88
Dimensions in. mm.
Width 18-7/16 468
Depth 35-1/4 895
Height 59-1/2 1511
Floor Clearance 7-1/2 191
*Mounted on standard casters
Bidding Specs
Electrical: Volt ___________________ Hz__________ ph _________
Neutral: Yes No Cooling: Air Water NA
Options:_________________________________________________
_________________________________________________________
Faucet
Hopper Locks
Shake Cup Dispenser
Options
Specifications
046338-ADV
2/06
Continuing research results in steady improvements; therefore, these
specifications are subject to change without notice.
Taylor Company,
A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax 815-624-8000
www.taylor-company.com
Commenti su questo manuale